"Safety Starts with You."

"Link up with us now."

Tool Box Talks (PPEs)

Toolbox Talks

 

Topic:        Basic Awareness on PPEs

 

 

We have six mandatory PPEs used in the factory

  • Safety Helmet,
  • Safety Goggles / glasses,
  • Ear Plugs / Muffs,
  • Gloves,
  • Safety Shoes,
  • Coverall / Overall.
 

    Additional specific PPEs such as safety harness, respiratory protection must be worn as per the need and requirements of permit / task.

 

Mangers, Contract and Supervisor’s responsibility: –

  • PPEs to be provided to all workers and replaced when damaged.
  • All PPEs supplied must meet minimum requirements.
  • All workers must be trained to use the PPEs.
  • All PEEs should be IS approved.
 
User Responsibility: –
Responsible to wear the mandatory PPEs during work and take care of their own PPEs.
 

1.   HEAD PROTECTION 

  • Safety
    Helmet must be used at all the times where work is going on.
  • Exception is for walking on roads, inside the workshop except for people involved in lifting operations of over-head cranes.
  • Chin strap must be used at all times.
  • Helmet must be marked with company name.
  • Replace helmets if any cracks/damage is observed.

 

2.   FOOT PROTECTION

  • Safety shoes/ boots must be worn while entry into work area.
  • Safety shoes must not be torn, and sole must be in good condition.
  • Safety shoes if damaged needs to be replaced.
 

3.   EYE PROTECTION

  • It is mandatory to use safety goggles/glasses in the work area.
  • The safety goggles/glasses must be scratch free.
  • Do not use black glasses during nighttime.
  • Chemical splash goggles or face shield to be used while working with chemicals.
  • Replace the safety goggles/glasses if damaged.

 

4.   HAND PROTECTION 

  • Hand gloves must be used to protect from cuts, burns, abrasions, chemical contacts, etc.
  • However specific types of hand gloves must be used for specific tasks involved.
  • Replace the hand gloves if damaged or contaminated.
 
 
 
 

5.   HEARING PROTECTION

  • High noise areas have been identified in the plants with warning signs.
  • Ear Plugs / Earmuffs or both must be worn in high noise area.
  • Replace the ear protection if damage.

 

6.   COVERALL

  • Persons entering the process area should wear coverall / overall (Dangri), or approved uniforms which cover the body including full length sleeve and pants.
  • Coverall made of Nylon, or any similar material should not be used.

 

 

 

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top